Flooring fitters near you: LVT, engineered wood, laminate and tile

Service

Flooring fitters near you: LVT, engineered wood, laminate and tile

A floor is only as good as what sits under it. We check subfloors, latex where needed and lay engineered wood, solid wood, LVT, laminate and tile so there is no movement, no lipping and no hollow spots.

We start by lifting the old covering and assessing the subfloor. Uneven concrete gets a self levelling compound, timber gets overboarded or screwed down, and damp readings are taken before anything is laid.

Expansion gaps, acclimatisation time and the right underlay all get respected, because those are the shortcuts that cause gapping and creaking later. Beading, thresholds and scribes around door linings are cut neatly, not caulked over.

We can lay to a single room or run one continuous floor through a whole ground floor as part of a wider renovation.

Flooring in progress

Not sure which floor suits your kitchen? Read about the best flooring for a kitchen.

Set on LVT? See LVT flooring fitting.

Flooring across our area

We lay floors from our base in Bishop's Stortford out to Harlow, Chelmsford and the other towns we cover, either as a single room or as part of a kitchen or bathroom project so the floor runs straight into the new room without an awkward threshold.

Floor fitting that starts underneath

Good flooring installation is mostly preparation. Before a plank or tile goes down we check the subfloor for level, movement and moisture, then level concrete with compound or overboard timber so the new floor lies flat. Getting this right is what separates fitters for flooring who leave a quiet, flat floor from ones whose joints open within a season.

Wet areas get extra care. Bathroom and wet room floors are prepared and waterproofed before tiling, and replacing an old wet room floor means lifting the tiles, checking the former and tanking, and making good anything that has been damaged by water.

Choosing the right floor for each room

LVT suits kitchens, hallways and bathrooms where water and wear are an issue. Engineered wood brings real timber to living rooms and bedrooms, laminate is a hard wearing budget option, and tile is the most durable choice for kitchens and bathrooms, especially over underfloor heating. We help you choose at the survey, room by room.

What the price includes

  • Lifting and disposing of old floor coverings
  • Subfloor preparation and levelling
  • Damp checks and membranes where required
  • Engineered and solid wood installation
  • LVT, laminate and click systems
  • Floor tiling and underfloor heating overlays
  • Beading, thresholds and neat scribing

Guides on cost and timing

Common questions

Do you fit laminate as well as wood and LVT?
Yes. We lay laminate, LVT, engineered and solid wood, and tile, all over a properly prepared subfloor.
Can you lay herringbone?
Yes. Herringbone is set out from the centre of the room and takes longer than plank, which our herringbone guide explains.
Do you remove the old floor?
Yes. Lifting and disposing of old coverings is part of the job, followed by subfloor preparation.
Do you cover Harlow and Chelmsford?
Yes, along with Bishop's Stortford and the other towns listed on our areas page.
How much does tile floor installation cost?
It depends on the floor area, the tile size and material, the laying pattern and how much the subfloor needs levelling or overboarding. Our tiling cost guide explains those factors, and your written quote itemises them.
How much does it cost to replace a wet room floor?
The cost is driven by how much has to come up, whether the former and tanking need replacing, any water damage to boards or joists underneath, and the new tile chosen. We inspect first and price each part separately.

Towns we cover

Ready to talk about your flooring project?

Call 07929 523832Get a quote